HobbyKing
HITEC HS-65MG MICRO METAL GEAR SERVO 1.8KG/12G/0.14SEC
| Motor Type | 3 Pole |
| Bearing Type | Top Ball Bearing |
| Speed @ 4.8 | 0.14 sec @ 60 deg. |
| Speed @ 6v | 0.11 sec @ 60 deg. |
| Torque @ 4.8v | 1.8 kg.cm |
| Torque @ 6v | 2.2 kg.cm |
| Size | 24 x 12 x 24mm |
| Weight | 12g |
Specifications:,
Hitec HS-65MG Micro Metal Gear Servo 1.8kg/12g/0.14sec Considered one of ...5 Reviews
HobbyKing
TURNIGY AE-30A BRUSHLESS ESC
| Output | Continuous 30A, burst 35A up to 10 seconds. |
| Input Voltage | 2-4 cells lithium battery or 5-12 cells NIMH battery. |
| BEC | Linear 2A @ 5V |
| Control Signal Transmission | Optically coupled system. |
| Max Speed | 2 Pole |
| 6 Pole | 70,000rpm |
| 12 Pole | 35,000rpm |
| Size | 50mm (L) * 26mm (W) * 12mm (H). |
| Weight | 25g. |
| Multiple protection features | Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection |
| Factory default settings | Brake |
| Battery type | Li-xx (Li-ion or Li-Po) |
| Low voltage cutoff threshold | Soft cut-off (2.6V) |
| Timing setup | Low |
| Soft Acceleration Start Up | Normal |
| Low voltage cutoff type | Medium |
Specification:, Features:, High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency., Programming features:, Brake setting (we recommend using brake for only folding props applications),
The Turnigy AE series are based on new powerful microprocessor. ...5 Reviews
HobbyKing
HURRICANE 425 BASIC KIT
| Overall length | 900mm (including cabin & canopy) |
| Main rotor diameter | 965mm |
| Main blade length | 425mm |
| Tail rotor diameter | 217mm |
| Flybar paddle | 78*42*6mm |
| Tail blade length | 75mm |
| Overall height | 310 mm |
| Overall width | 80 mm |
| Motor | 1700w/kv1400 external brushless motor (Not Included) |
| ESC | 60A/25V ESC with built-in SBEC (Not Included) |
| Total weight | 1450g (Equipped with Blades and all electronic gears except Battery). |
| Main rotor blades | 425mm FG Blades (Not Included) |
| Flying duration | 5~6 minutes with 11.1v/2200mah Li-Po battery 2 packs in series 22.2v (Not Included) |
| Motor | 1700w/kv1400 external brushless motor . |
| ESC | 60A/25V ESC with built-in SBEC. |
| Charger | Li-Po battery charger |
| Main rotor blades | 425mm FG Blades |
Specifications:, Required:, 6 (or more) channel heli-capable transmitter (with CCPM function), Battery : Li-Po battery 3S1P (11.1v / 20C or more / 2000mah or more)*2 packs in series or 6S1P (22.2v/ 20C or more / 2000mah or more)*1 pack,
The lightweight kit comes with 425mm Blades which provides rock ...5 Reviews
HobbyKing
TURNIGY NANO-TECH 130MAH 1S 25~40C LIPO PACK (KYOSHO, EFLITE, PARKZONE ETC)
| Capacity | 130mAh |
| Dimensions | 39x12x7mm |
| Balance Plug | JST-XH |
| Discharge Plug | JST-XH |
Voltage:, 1S1P / 1 Cell / 3.7V, Discharge:, 25C Constant / 40C Burst, Weight:, 3.8g (including wire, plug & case), Suited to the following models:, E-flite MCX, MCX2, MSR,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
POWER HD METAL GEAR SERVO 60G/12.2KG/.16SEC
| Model | HD-1201MG |
| Voltage | 4.8~6.0v |
| Speed | 0.16~0.14sec |
| Torque | 12.2~13.2kg/cm |
| Weight | 60g |
| Size | 40.7x20.5x39.5mm |
5 Reviews
HobbyKing
HK2836 EDF OUTRUNNER 3500KV FOR 64MM
| Specs | Kv- |
| Dimensions | 75 x 28mm |
| Shaft diameter | 3.0mm |
| Shaft length | 10mm |
| Voltage | 14.8V |
| Weight | 97g |
| Output Power | 520w |
| Max current(<60s) | 35A |
| RPM/V | 3500 |
| Thrust | 1100g(38.8oz.) |
| Recommended model weight | 600-800g |
| Recommended model fans | 64mm Fans |
| Mounting Hole Bolt Circle | 18mm |
| Mtg. Hole Number & Size | 4 x M2 |
5 Reviews
HobbyKing
TURNIGY NANO-TECH 2650MAH 6S 25~50C LIPO PACK
: 2650mAh, : 6S1P / 6 Cell / 22.2V, : 25C Constant / 50C Burst, : 399g (including wire, plug & case), : 149x44x31mm, : JST-XH, Discharge Plug:, 4mm Bullet-connector, Suited to the following models:, MIKADO LOGO400, ALIGN T-REX500, GUAI EP425/550/X5, Compass Atom 500, MSH Protos500;JR Vibe 500E,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
BMS-371DD DIGITAL MICRO SERVO 1.2KG / .10SEC / 6G
| Gear type | Plastic gear |
| Motor type | Coreless motor |
Specifications:, Weight 6.2 grams / 0.22 oz.,
BMS-371DD Digital Micro Servo 1.2kg / .10sec / 6g Dimensions ...5 Reviews
HobbyKing
MI DIGITAL HIGH TORQUE MG SERVO 6.0KG / 0.11SEC / 26G
| Voltage | 4.8v / 6v |
| Weight | 26.12g |
| Motor | Low Draw Coreless |
| Gear Train | Full Titanium Alloy |
Specs:, Speed:, 0.13sec/60deg (4.8v) - 0.11sec/60deg (6v), Torque:, 5kg.cm (4.8v) - 6kg.cm (6v), Size:, 35.6mm x 15mm x 31.5mm, Mi : Magnetic Induction, uses a magnetic rotary encoder in place of a traditional potentiometer (invented in 1877). Magnetic Rotary encoders have a longer life and suffer less wear.,
The HK Mi Series servos represent the next break through ...5 Reviews
HobbyKing
HOBBY KING 30A ESC 3A UBEC
| Constant Current | 30A |
| Burst Current | 40A |
| Size | 54 x 26 11mm |
| Weight | 32g |
| Battery Type | Lipo /NiXX |
| Brake | On / Off |
| Voltage Protection | Low / Mid / High |
| Timing | Auto / High / Low |
| PWM Frequency | 8k / 16k |
Specs:, Battery:, 2-4S Lipoly / 5-12s NiXX, BEC:5, Motor Type:, Sensorless Brushless, Programming Functions:, Protection mode:, Reduce power / Cut off power, Startup:, Fast / Normal / Soft, Helicopter mode:, Off / 5sec / 15sec (Start up delay), Note:, User manual can be downloaded from the files Tab.,
v / 3A5 Reviews
HobbyKing
MI DIGITAL HIGH SPEED METAL GEAR SERVO JR/HITEC 5.1KG / 0.04 / 58G
| Voltage | 4.8v / 6v |
| Weight | 58g |
| Gear Train | Full Titanium Alloy |
| Motor | Coreless |
Specs:, Speed:, 0.05sec / 60deg (4.8v) - 0.04 /60deg (6v), Torque:, 4.50kg.cm (4.8v) - 5.60kg.cm (6v), Size:, 40mm x 20mm x 39.2mm, Mi : Magnetic Induction, uses a Magnetic Rotary Encoder in place of a traditional potentiometer (invented in 1877). Magnetic Rotary encoders have a longer life and suffer less wear.,
The HK Mi Series servos represent the next break through ...5 Reviews
HobbyKing
S2030-6570 BRUSHLESS INRUNNER 6560KV (7T)
| Motor Size | 2030 |
| RPM/V | 6560kv (7T) |
| Max Load | 14A |
| Max Volts | 11.1v (2~3s lipo) |
| Max Watts | 120w |
| Resistance | 0.0437 |
| Diameter | 20mm |
| Front Mounting Hole Distance | 16mm or 17mm |
| Shaft Diameter | 3mm |
| Shaft Length | 10mm |
| Can Size | 130 |
| Weight | 45g |
Front Mount Thread Size:, 16mm M2.5 / 17mm M3.0, Plug type:, 3mm Bullet-connector,
5 Reviews
HobbyKing
MI DIGITAL HIGH TORQUE SERVO 7.5KG / 0.12SEC / 48G
| Voltage | 4.8v / 6v |
| Weight | 48g |
| Gear Train | Nylon |
| Motor | Coreless |
Specs:, Speed:, 0.13sec/60deg (4.8v) - 0.12sec/60deg (6v), Torque:, 6.5kg.cm (4.8v) - 7.5kg.com (6v), Size:, 40.2mm x 20.1mm x 42.7mm, Mi : Magnetic Induction, uses a Magnetic Rotary Encoder in place of a traditional potentiometer (invented in 1877). Magnetic Rotary encoders have a longer life and suffer less wear.,
The HK Mi Series servos represent the next break through ...HobbyKing
FIGHTER R/C JET GREY EPO (KIT)
| Wing Span | 840mm |
| Length | 1030mm |
| Flying Weight | 650g |
| ESC | 25A (Required) |
| EDF Unit | 70mm (Included) |
| ESC | 25A |
| Servo | 9g * 3pcs |
Specification:, Motor:, 2826-3200kv Brushless outrunner (Required), Servo:, 9g * 3pcs (Required), Battery:, 1600mAh 3S1P 20C Lipoly Pack (Required), Required:, Your own TX & RX (with V-type mixing), Motor:, 2826-3200kv Brushless outrunner, Battery:, 1600mAh 3S1P 20C Lipoly Pack,
An excellent parkflyer sized EDF jet (EPO). The jet comes ...5 Reviews
HobbyKing
MI DIGITAL HIGH TORQUE METAL GEAR SERVO JR/HITEC 11.8KG / 0.07 / 58G
| Voltage | 4.8v / 6v |
| Weight | 58g |
| Gear Train | Full Titanium Alloy |
| Motor | Coreless |
Specs:, Speed:, 0.08sec / 60 deg (4.8v) - 0.07sec / 60 deg (6v), Torque:, 9.7kg.cm (4.8v) - 11.8kg.com (6v), Size:, 40mm x 20mm x 39.2mm, Mi : Magnetic Induction, uses a Magnetic Rotary Encoder in place of a traditional potentiometer (invented in 1877). Magnetic Rotary encoders have a longer life and suffer less wear.,
The HK Mi Series servos represent the next break through ...5 Reviews